C 3500 Truck 2WD V8-6.0L VIN U (2001)
3. Remove the TCC PWM solenoid retainer (5).
4. Remove the TCC PWM solenoid (1).
5. Remove the TCC regulator apply valve pin (4). Use a drill bit to remove the spring pin.
6. Remove the TCC regulator apply valve (2).
7. Remove the TCC regulator apply valve spring (3).
8. Remove the actuator feed limit valve spring retainer (1).
9. Remove the actuator feed limit valve spring (2).
10. Remove the actuator feed limit valve (3).
11. Remove the accumulator valve bore plug retainer pin (1).
12. Remove the accumulator valve bore plug (2).
13. Remove the accumulator valve spring (3).,
14. Remove the accumulator valve (4).
