C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install the yaw rate sensor/lateral accelerometer to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the nuts retaining the yaw rate sensor lateral accelerometer (2) to the vehicle.
^
Tighten the nuts to 10 Nm (89 inch lbs.).
3. Connect the electrical connector (3) to the yaw rate sensor/lateral accelerometer.
4. Install the carpet.
5. Install the passenger seat to the vehicle.
6. Complete the lateral accelerometer procedure.
Learn Lateral Accelerometer Procedure
6.1.
Turn the ignition ON.
6.2.
Install the scan tool.
6.3.
Go to Rear Wheel Steering menu choice in the scan tool.
6.4.
Go to Special Functions menu choice in the scan tool.
6.5.
Go to Learn Lateral Accelerometer menu choice in the scan tool and complete the procedure.
