Camaro V8-305 5.0L VIN E (1992)
Brake Pad: Service and Repair
PBR Dual Piston Caliper (Front)
Brake Shoe & Lining Removal
Fig. 2 Bottoming Pistons In Caliper Bore
1.
Remove brake caliper as outlined previously.
2.
Position suitable pliers over caliper and center of inboard shoe and lining as shown, Fig. 2, then squeeze pliers to bottom pistons in caliper bores.
3.
Remove shoe and lining assemblies.
Brake Shoe & Lining Installation
1.
Install inboard shoe and lining, ensuring tangs on shoe fully engage pistons. When properly installed, shoe should be flush with piston.
2.
Install outboard shoe and lining into caliper housing, ensuring insulators are fully seated into holes in outboard side of housing.
3.
Install caliper as outlined further on.