Camaro V8-305 5.0L VIN E (1992)
3. Install Pulley Rotor and Puller Guide 3 25031 to the front head (Fig. 15), and install 3 33020 Pulley Rotor and Bearing Puller down into the inner
circle of slots in the rotor (Fig. 16). Turn the J 33020 puller clockwise in the slots to engage the puller tangs with the segments between the slots in
the rotor.
4. Hold the J 33020 Puller in place and tighten the puller screw against the Puller Guide to remove the pulley rotor and bearing assembly (Fig. 17).
5. To prevent damage to the pulley rotor during bearing removal, the rotor hub must be properly supported.
5. To prevent damage to the pulley rotor during bearing removal, the rotor hub must be properly supported.
