chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Catalytic Converter > < Vin E, 7, or Z|Page 2948
Page 2
background image

2.

Place new fan filter on hub if necessary, then spacer and pump pulley. Tighten pulley bolts equally to press the filter on to the pump. Do not
hammer on filter. If new filter is installed, it may squeal until seated on pump.

3.

Install and adjust belt. Check for proper system operation.

Catalytic Converter > < Vin E, 7, or Z|Page 2948