Recall: Seat Belt Buckles May Not Latch or Release
Install the pushbutton spring on the detent lever. Note that there are two different detent lever designs using either one or two retaining nubs - Figure # 7.
The pushbutton spring must be positioned over the retaining nub(s) on the detent lever and secured under the pushbutton - Figure # 8.
6.
Install a new pushbutton from the service kit by inserting spring installation tool between buckle cover and pushbutton retainer to move the
button away from the cover - see Figure # 9. Locate now red pushbutton to the pushbutton retainer and push into position until an audible