Camaro V8-305 5.0L VIN F FI (1985)
FIGURE 3
9.
Position and secure sender pipe spacer/isolator with tie strap to prevent pipes from becoming dislodged (See Figure 3).
10.
Install tank to vehicle underbody ensuring it is positioned so that tank sits freely in underbody guides. secure in position torquing strap
bolts/screws to 25 ft. lbs.
11.
Complete reassembly of vehicle following shop manual procedures.
12.
Start vehicle, inspect for any fuel leakage and repair as necessary.
Parts that are required for this procedure are available from GMSPO and are noted below excluding applicable sender part numbers which can be
procured from GMSPO Parts Catalog.
