chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 7342 > < Diagram Information and Instructions|Page 7340
Page 1
background image

Headlamp Switch: Service and Repair

Fig. 4 Left control pod removal. 1984---86 Berlinetta

1984-86 Berlinetta

1. Disconnect battery ground cable.
2. Remove instrument panel close-out panel and lower steering column cover.
3. Remove bottom front screw securing left control pod, then release pod retainer.
4. Disconnect left control pod electrical connector below instrument panel, Fig. 4.
5. Remove pod housing and screw securing control assembly to track.
6. Slide control assembly from track.
7. Reverse procedure to install.

1985-88 (Exc.1984-86 Berlinetta)

1. Disconnect battery ground cable.
2. Remove right and left lower trim plates. Removal of lower I.P. cover(s) not required.
3. Remove 1.P. cluster trim plate.

Diagram Information and Instructions|Page 7342 > < Diagram Information and Instructions|Page 7340