chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Park/Neutral Switch|Page 643 > < Park/Neutral Switch|Page 641
Page 1
background image

Transmission Position Switch/Sensor: Testing and Inspection

WIRING DIAGRAM

CHART C-1A

PARK/NEUTRAL SWITCH

2.8L & 5.0L "F" SERIES

FUEL INJECTION (PORT)

    The Park/Neutral Switch contacts are a part of the Neutral Start switch and are closed to ground in park or neutral, and open in drive ranges.
    The ECM supplies ignition voltage through a current limiting resistor to Ckt 434 and senses a closed switch when the voltage on Ckt 434 drops to less
than one volt.
    The ECM uses the P/N signal as one of the inputs to control:

a.

Idle Air Control

b.

VSS Diagnostics

c.

EGR Control

Park/Neutral Switch|Page 643 > < Park/Neutral Switch|Page 641