Camaro V8-5.7L VIN G (1998)
6. Lubricate the brake pedal pin (10) with chassis lubricant.
7. Install the following components to the brake pedal pin (10):
^
The brake pedal pushrod pin retainer (7)
^
The brake pedal pushrod (8)
^
The brake pedal pushrod washer (11)
8. Install the EBCM. Refer to Antilock Brakes.
9. Install the left side instrument panel insulator. Refer to Instrument Panel, Gauges, and Warning Indicators.
10. Connect the negative battery cable.
Tighten the negative battery cable to 15 Nm (11 ft. lbs.).
11. Adjust the following components. Refer to Stoplamp Switch Adjustment.
^
Cruise control release switch
^
Stoplamp and TCC switch
^
Cruise control clutch switch or cruise control clutch anticipate switch
