Camaro V8-5.7L VIN G (1998)
1. Install the exhaust muffler to the vehicle.
2. Raise the axle slightly.
3. Position the exhaust muffler clamp.
NOTICE: Refer to Fastener Notice in Cautions and Notices.
4. Tighten the exhaust muffler clamp attaching the muffler to the right catalytic converter.
^
Tighten the exhaust muffler clamp bolt to 68 Nm (50 ft. lbs.).
5. Install the passenger side rear coil spring and bushing.
6. Raise the axle completely.
7. Install the torque arm bolts at the rear axle.
^
Tighten the torque arm bolts to 130 Nm (96 ft. lbs.).