Camaro V8-5.7L VIN G (1998)
Parking Light Bulb: Service and Repair
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Open the access door in the front bumper air deflector.
3. Disconnect the electrical connector from the park and turn signal lamp.
4. Remove the park and turn signal lamp bulb from the socket.
INSTALLATION PROCEDURE
1. Install the park and turn signal lamp bulb to the socket.
2. Connect the electrical connector to the park and turn signal lamp.
3. Close the access door in the front bumper air deflector.
4. Lower the vehicle.
