Camaro V8-5.7L VIN G (1998)
1. Install the following wiring harness sockets to the taillamp.
^
The turn signal socket (4)
^
The back-up lamp socket (3)
^
The taillamp socket (2)
^
The taillamp/stoplamp socket (1)
2. Install the taillamp to the rear end finishing panel.
NOTE: Refer to Fastener Notice
3. Install the taillamp nuts.
Tighten
Tighten the taillamp nuts to 3 N.m (27 lb in).
4. Reinstall the rear compartment trim.
