Camaro V8-5.7L VIN G (1998)
Wheel Fastener: Service and Repair
REMOVAL PROCEDURE
^
Tools Required:
-
J 6627-A Wheel Stud Remover
NOTICE: Do not damage wheel mounting surface on hub flange. Brake disc must be supported before pressing wheel bolt in or out.
Use the J 6627-A in order to remove the hub or disc bolts.
INSTALLATION PROCEDURE
1. Install a new serrated bolt into the hole in the hub.
2. Tap the bolt lightly with a hammer in order to start bolt serration in the hole, ensuring that the bolt is square in the hub flange.