Camaro V8-5.7L VIN G (1998)
7. Remove the J29714-A from the oil pan rail.
8. Install the two oil pan bolts below the 2-4 servo cover.
^
Tighten the oil pan bolts to 11 Nm (97 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
9. Raise the transmission.
10. Install the catalytic converter heat shield.
11. Install the transmission support.
12. Remove the support from the transmission.
13. Install the torque arm.
14. Install the propeller shaft.
15. Install the oxidation catalytic converter.
16. Lower the vehicle.