Camaro V8-6.2L (2010)
Note: Detach the rear park brake cable and clevis (1) from the park brake actuator (2) by pivoting the rear park brake cable and clevis (1)
rearward using pliers.
7. Detach the rear park brake cable and clevis (1) from the park brake actuator (2).
Note: Remove the outer cable (4) from the rear knuckle (3) by pulling the outer cable (4) forward.
8. Remove the outer cable (4) from the rear knuckle (3).
Note: Bolts with thread sealant must be discarded after removal.
9. Remove the brake caliper anchor plate to knuckle retaining bolts (2).
Discard the bolts.
Note: DO NOT disconnect the hydraulic brake flexible hose from the brake caliper otherwise complete bleeding of the braking system will be
necessary.