Camaro V8-6.2L (2010)
4. Install the material to the two lower mounting tabs of the cluster trim plate as shown.
5. Locate the mounting tab strengthening rib positioned on the right side of the cluster trim plate (note that the plate is turned upside down for
photographic purposes).
6. Prepare a 10 mm x 25 mm (13/32 in x 1 in) piece of adhesive-backed flocking material, such as Kent Industries* # KT13485, or the equivalent.
7. Install the flocking material to the trim plate strenghtening rib in the area shown (note that the plate is turned upside down for photographic purposes).
8. Install the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement in SI.
