Camaro V8-6.2L (2010)
3. Push the drain hose into the hole in the front lower hinge pillar. Insert approximately 25 mm (1 in) of drain hose into the hole.
4. Connect the drain hose (1) to the sunroof frame.
5. Connect the front drain hose to the attachments points (2) on the windshield pillar.
6. Install the front drain hose grommet (3) in the front lower hinge pillar.
7. Install the body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service
and Repair/Body Hinge Pillar Trim Panel Replacement).
8. Install the left and right air outlet duct.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
9. Install the outlet screw. Tighten the door striker bolts to 2 Nm (89 lb in).
10. Install the carpet retainer.
11. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair).
Sunroof Housing Rear Drain Hose Replacement
Sunroof Housing Rear Drain Hose Replacement
Removal Procedure
1. It is only necessary to lower the headliner. Only do those steps in the headliner replacement procedure that will lower the headliner enough to gain
access to the part. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair).
