Camaro V8-6.2L (2010)
2. With the aid of an assistant, position the new sunroof frame to the studs located on the roof ring.
3. Install the center sunroof frame to roof bolts (1, 2) and tighten by hand.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the remaining sunroof frame (1) bolts to the frame in sequence (3-8) and tighten to 10 Nm (89 lb in).
5. Connect the front and rear drain hoses (1) to the drain spouts on the sunroof frame. Refer to Sunroof Housing Front Drain Hose Replacement (
See: Sunroof / Moonroof Drain/Service and Repair/Removal and Replacement/Sunroof Housing Front Drain Hose Replacement) and Sunroof
Housing Rear Drain Hose Replacement (See: Sunroof / Moonroof Drain/Service and Repair/Removal and Replacement/Sunroof Housing Rear
Drain Hose Replacement).
6. Install the sunroof window to the new sunroof frame. Refer to Sunroof Window Replacement (See: Sunroof / Moonroof Panel/Service and Repair
).
7. Install the sunshade panel to the new sunroof frame. Refer to Sunroof Sunshade Replacement (See: Sun Shade/Service and Repair).
8. Connect the electrical connector to the sunroof actuator/motor.
9. Secure the harness to the sunroof frame.
10. Verify the proper operation of the sunroof before securing the headliner. Refer to Sunroof Motor/Actuator Initialization/Teach Process (See:
