Camaro V8-6.2L (2010)
4. Remove the brake pedal assembly bolts (1).
5. Remove the brake pedal assembly nuts (1).
6. Disconnect the power brake booster pushrod from the brake pedal.
7. Release the electrical harness from the retaining clips on the brake pedal bracket assembly.
8. Carefully push against the power brake booster studs to position the power vacuum brake booster forward slightly.
9. Maneuver the brake pedal assembly from under the instrument panel and remove the brake pedal assembly from the vehicle.
Installation Procedure
1. Maneuver the brake pedal assembly into the installed position from under the instrument panel.
2. Position the power vacuum brake booster rearward.
3. Ensure the power vacuum brake booster studs engage the brake pedal assembly.