Camaro V8-6.2L (2010)
Note: The brake caliper bolts must be replaced any time they are removed. Do not reuse the brake caliper bolts.
9. Remove and discard the brake caliper bolts (1).
10. Remove the brake caliper.
Installation Procedure
1. Install the brake caliper to the steering knuckle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: The brake bolts must be replaced any time they are removed.
2. Install 2 new brake caliper bolts (1) and tighten to 40 Nm (33 lb ft) +90 degrees.