Camaro V8-6.2L (2010)
1. Install the brake caliper to the suspension knuckle.
Note: The brake caliper bolts must be replaced any time they are removed.
2. Hand install new brake caliper bolts (1)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the brake caliper bolts to 40 Nm (30 lb ft) + 90 degrees.
4. Assemble the brake hose fitting bolt (1) and the 2 new brake hose fitting gaskets (2) to the brake hose (3).
5. Install the brake hose assembly to the brake caliper and tighten the brake hose fitting bolt to 40 Nm (30 lb ft).
6. Install the rear disc brake pads. Refer to Rear Disc Brake Pads Replacement (See: Brake Pad/Service and Repair/Removal and Replacement/Rear
Disc Brake Pads Replacement).
7. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (See: Brake Bleeding/Service and Repair).
Front Brake Caliper Hardware Replacement
