Camaro V8-6.2L (2010)
6. Install the disc brake caliper (1).
Note: The brake caliper guide pin bolts must be replaced any time they are removed.
7. Using a backup wrench on the brake caliper guide pins, install 2 new brake caliper guide pin bolts (1) and tighten to 27 Nm (20 lb ft).
8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
Rear Brake Caliper Bracket Replacement
Rear Brake Caliper Bracket Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
