Camaro V8-6.2L (2010)
1. Install the check valve to the vacuum brake booster hose, if removed.
If necessary, a small amount of denatured alcohol may be used as a lubricant for assembly. Do not use soap.
2. Position the clamp and secure the vacuum hose to the check valve.
3. Install the power brake booster vacuum hose (1) to the vacuum port on the LH side of the intake manifold.
Position the clamp and secure the vacuum hose to the vacuum port.
4. Install the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).