Camaro V8-6.2L (2010)
3. Secure the wheel speed sensor wire harness retainer (1) to the outer wheel house panel.
4. Secure the wheel speed sensor wire harness to the front suspension strut (2).
5. Feed the wheel speed sensor electrical connector and harness through the wheel house panel closeout.
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
7. Lower the vehicle.
8. From inside the engine compartment, connect the front wheel sensor electrical connector (1).
9. Secure the wheel speed sensor electrical connector retainer to the inner wheel house panel.
