Camaro V8-6.2L (2010)
4. Install the radiator inlet hose (3) to the engine.
5. Engage tension on the radiator inlet hose clamp (1) at the engine using J 38185 - Hose Clamp Pliers.
6. Install the radiator inlet hose (3) to the engine oil cooler pipe.
7. Engage tension on the radiator inlet hose clamp (2) at the engine oil cooler pipe using J 38185 - Hose Clamp Pliers.
8. Lower the vehicle
9. Install the air cleaner resonator and outlet duct. Refer to Air Cleaner Resonator and Outlet Duct Replacement (See: Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Resonator and Outlet Duct
Replacement).
10. Install the engine cover. Refer to Engine Cover Replacement (See: Engine/Service and Repair/Removal and Replacement/Engine Cover
Replacement).
11. Fill the cooling system. Refer to Cooling System Draining and Filling (See: Service and Repair/Cooling System Draining and Filling).
