Camaro V8-6.2L (2010)
9. Install the EVAP valve (730), bracket (741) and bolt (742).
Tighten the bolt to 50 Nm (37 lb ft).
10. Install the EVAP tubes (729, 735).
11. Install the fuel rail. Refer to Fuel Rail and Injectors Installation (See: Service and Repair/Overhaul/100. Fuel Rail and Injectors Installation).
12. Connect the electrical connector for the MAP sensor.
13. Install the vacuum hose for the brake booster.
14. Connect the electrical connectors (3) for the throttle body.
15. Connect the electrical connector (1) for the fuel injectors.
16. Refill the cooling system. Refer to Cooling System Draining and Filling (See: Cooling System/Service and Repair/Cooling System Draining and
Filling).
17. Install the engine covers. Refer to Engine Cover Replacement (See: Service and Repair/Removal and Replacement/Engine Cover Replacement).
