Camaro V8-6.2L (2010)
Timing Chain: Service and Repair
Camshaft Timing Chain and Sprocket Replacement
Camshaft Timing Chain and Sprocket Replacement
Special Tools
*
EN 46330 Timing Chain Tensioner Retaining Pin
*
J 8433 Puller Bar
*
J 41478 Crankshaft Front Oil Seal Installer
*
J 41558 Crankshaft Sprocket Remover
*
J 41665 Crankshaft Balancer and Sprocket Installer
*
J 41816-2 Crankshaft End Protector
*
J 45059 Angle Meter
Removal Procedure
1. Remove the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (See: Engine Lubrication/Oil Pump/Service and
Repair).
2. Rotate the crankshaft until the timing marks on the crankshaft and the camshaft sprockets are aligned.
Caution: Do not turn the crankshaft assembly after the timing chain has been removed in order to prevent damage to the piston assemblies or the
valves.
3. Remove the camshaft sprocket bolt (206) and discard sprocket bolt.
4. Remove the camshaft sprocket (205) and timing chain (208).
