Camaro V8-6.2L (2010)
6. Disconnect the center steering shaft from the lower steering shaft. Separate the shafts and position aside to provide a removal envelope for the
manifold. Refer to Intermediate Steering Shaft Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Intermediate Steering Shaft Replacement).
7. Lower the vehicle.
8. Remove the exhaust manifold bolts.
9. Remove the exhaust manifold, bolts, and gasket. Discard the gasket.
10. Remove the heat shield from the manifold, if required.
11. Clean and inspect the exhaust manifold. Refer to Exhaust Manifold Cleaning and Inspection (See: Engine/Service and Repair/Overhaul/70.
Exhaust Manifold Cleaning and Inspection).
Installation Procedure
Note: Tighten the exhaust manifold bolts as specified in the service procedure. Improperly installed and/or leaking exhaust manifold gaskets may effect
vehicle emissions and/or On-Board Diagnostics (OBD) II system performance.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
