Camaro V8-6.2L (2010)
Ignition Cable: Service and Repair
Spark Plug Wire Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
2. Disconnect the spark plug wire (2) to the spark plug.
*
Twist each spark plug boot 1/2 turn.
*
Pull only on the boot in order to remove the wire from each spark plug.
3. Disconnect the spark plug wire from the ignition coil (1).
*
Twist each spark plug boot 1/2 turn.
*
Pull only on the boot in order to remove the wire from the ignition coil.
Installation Procedure