Camaro V8-6.2L (2010)
Note: When re-balancing a tire on an aluminum wheel, coated balance weights must be used in order to reduce the chance of future cosmetic
damage.
3. Install NEW coated balance weights at marked locations.
Note: Use a torque stick on an impact wrench, or a torque wrench to consistently and uniformly fasten the wheel to the specified torque for the
vehicle. The star pattern must be followed.
4. Install wheels on vehicle.
Repair Option Number 2 - Outside Companies
Note: Some outside companies are offering wheel refinishing services. Such refinished wheels will be permanently marked by the refinisher and are
warranted by the refinisher. Any process that re-machines or otherwise re-manufactures the wheel should not be used.
A refinishers responsibility includes inspecting for cracks using the Zyglo system or the equivalent. Any cracked wheels must not be refinished. No
welding, hammering or reforming of any kind is allowed. The wheel ID must be recorded and follow the wheel throughout the process in order to assure
that the same wheel is returned. A plastic media blast may be used for clean up of the wheel. Hand and/or lathe sanding of the machined surface and the
wheel window is allowed. Material removal, though, must be kept to a minimum. Re-machining of the wheel is not allowed. Paint and/or Clearcoat must
not be present on the nut chamfers, the wheel mounting surfaces and the wheel pilot hole. The refinisher must permanently ID stamp the wheel and
warrant the painted/Clearcoated surfaces for a minimum of one year or the remainder of the new vehicle warranty, whichever is longer.
Note: Whenever a wheel is refinished, the mounting surface and the wheel nut contact surfaces must not be painted or Clearcoated. Coating these
surfaces could affect the wheel nut torque.
When re-mounting a tire on an aluminum wheel, coated balance weights must be used in order to reduce the chance of future cosmetic damage.
