chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - Various Vehicle Updates|Page 8128 > < Electrical - Information For Electrical Ground Repair|Page 8123
Page 1
background image

Wiring Harness: All Technical Service Bulletins
Campaign - Various Vehicle Updates

SERVICE UPDATE

Bulletin No.: 09207A

Date: September 23, 2009

Subject: 09207A - Service Update for Inventory and Customer Vehicles - HVAC Reprogram, Engine Harness Position Inspection, Rear Spoiler
Fasteners - Expires with Base Warranty

Models:

2010 Chevrolet Camaro

Supercede:
The HVAC reprogramming procedure in this bulletin has been revised. Please discard all copies of bulletin 09207A, issued September 2009.

THIS SERVICE UPDATE INCLUDES VEHICLES IN DEALER INVENTORY AND CUSTOMER VEHICLES THAT RETURN TO THE
DEALERSHIP FOR ANY REASON. IT WILL EXPIRE AT THE END OF THE INVOLVED VEHICLE'S NEW VEHICLE LIMITED
WARRANTY PERIOD. 

Purpose

This bulletin provides a service procedure to reprogram the HVAC system to prevent HVAC evaporator freeze-up after an extended highway drive,
tighten the fasteners on the rear spoiler, and inspect the engine harness position on certain 2010 model year Chevrolet Camaro vehicles. 

This service procedure should be completed as soon as possible on involved vehicles currently in dealer inventory and customer vehicles that
return to the dealer for any type of service during the New Vehicle Limited Warranty coverage period. 

Vehicles Involved

A list of involved vehicles currently in dealer inventory is available on the "Service Update Bulletin Information" link under the "Service" tab in GM
GlobalConnect (US), or attached to the Dealer Communication (Canada), used to release this bulletin. Customer vehicles that return for service, for any
reason, and are still covered under the vehicle's base warranty, and are within the VIN breakpoints provided below, should be checked for vehicle
eligibility in the appropriate system listed below.

Important
Dealers are to confirm vehicle eligibility prior to beginning repairs by using GMVIS (dealers using WINS) or Investigate Vehicle History
(dealers using GWM). Not all vehicles within the above breakpoints may be involved.

Parts Information

Parts required to complete this program are to be obtained from General Motors Service and Parts Operations (GMSPO). Please refer to your "involved
vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency situation, parts should
be ordered on a CSO = Customer Special Order.

* Very few vehicles will require a nut for the rear spoiler.

Service Procedure

Note

If the vehicle is equipped with a rear spoiler or a V8 engine, perform the repair and inspection during the programming event. 

Reprogram HVAC Module (All Vehicles)

Campaign - Various Vehicle Updates|Page 8128 > < Electrical - Information For Electrical Ground Repair|Page 8123