chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Throttle Position Sensor > < Heated Oxygen Sensor - Bank 1 Sensor 1|Page 3770
Page 5
background image

2. Connect the HO2S electrical connector (1).
3. Lower the vehicle.
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection   (See: Starting and Charging/Battery/Battery

Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).

Throttle Position Sensor > < Heated Oxygen Sensor - Bank 1 Sensor 1|Page 3770