Camaro V8-6.2L (2010)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder Replacement
Removal Procedure
1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
2. Remove the steering column shroud. Refer to Steering Column Shroud Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Shroud Replacement).
3. Insert the key into the ignition lock cylinder and turn the key to the RUN position.
4. Depress the retainer through the lock housing access hole (2) with a small Allen wrench or similar pick-type tool.
5. Remove the ignition lock cylinder (1) from the ignition and start switch housing.
Installation Procedure
1. If you are installing a new ignition lock cylinder, code the lock cylinder. Refer to Lock Cylinder Coding - Ignition (See: Body and
Frame/Locks/Service and Repair/Lock Cylinder Coding - Ignition).