Camaro V8-6.2L (2010)
1. Inspect each spark plug gap. Adjust each plug as needed.
Spark plug gap: 1.524 mm (0.060 in).
2. Hand start the spark plugs in the corresponding cylinders.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the spark plugs. Tighten the engine spark plug on a NEW cylinder head to 20 Nm (15 lb ft) and the engine spark plug on subsequent
installations to 15 Nm (11 lb ft).
4. Install the spark plug wires. Refer to Spark Plug Wire Replacement (See: Ignition Cable/Service and Repair).
5. Install the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
