Camaro V8-6.2L (2010)
6. Clean the wheel speed sensor area on the suspension knuckle of any accumulated dirt and debris.
7. Remove the wheel speed sensor bolt (1).
8. Remove the wheel speed sensor assembly from the suspension knuckle by pulling straight out.
Installation Procedure
1. Install the wheel speed sensor assembly to the suspension knuckle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the wheel speed sensor bolt (1) and tighten to 9 Nm (80 lb in).
