Camaro V8-6.2L (2010)
The EL 35616-20F - Fused Jumper Wire includes small clamp connectors that provide adaptation to most connectors without damage. This fused jumper
wire is supplied with a 20 A fuse which may not be suitable for some circuits. Do not use a fuse with a higher rating than the fuse that protects the circuit
being tested.
AFL/EPC Connectors
AFL/EPC Connectors
Special Tools
*
EL-38125-580 - Terminal Release Tool Kit
*
J-38125-12A - Terminal Release Tool
*
J-38125-216 - Terminal Release Tool
For equivalent regional tools, refer to Special Tools (See: Power and Ground Distribution/Tools and Equipment).
Terminal Removal Procedure
Follow the steps below in order to remove terminals from the connector.