Camaro V8-6.2L (2010)
4. Connect the CMP sensor electrical connector (1) to wiring harness.
5. Install the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
6. Connect the battery ground cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
7. If re-programming is required, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
