Camaro V8-6.2L (2010)
2. Turn the key to the RUN position and insert ignition lock cylinder (1) into the ignition and start switch housing.
3. Turn the key to the LOCK position and remove the key from the ignition lock cylinder.
4. Install the steering column shroud. Refer to Steering Column Shroud Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Shroud Replacement).
5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
