Camaro V8-6.2L (2010)
2. Locate the heater hose clamps (1) and harness bracket (2). The heater hoses are located on the passenger side of engine. Refer to illustration.
3. Determine if the heater hose clamps (1) are touching the harness (4). Refer to illustration.
-
If the heater hose clamps (1) are touching the harness (4) (A), loosen the harness bracket nut (3) and adjust the bracket (2) clockwise to the 6
o'clock position to move the harness (4) away from the heater hose clamp (1). Tighten the bracket nut (3) once clearance between the heater
hose clamp and the harness is achieved. Reposition the heater hose clamp, if required.
-
If the heater hose clamps (1) are NOT touching the harness (4) (B), no further action is required.
Claim Information
1. Submit a claim using the table below.
2. Courtesy Transportation - For dealers using WINS, submit using normal labor code; for dealers using GWM - submit as Net Item under the repair
labor code.
Disclaimer
