Camaro V8-6.2L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the adjuster link bolt (1) in the knuckle and tighten to 140 Nm (103 lb ft).
Note: Ensure that the alignment marks DO NOT move when tighten the adjuster nut to specifications.
4. Install the adjuster washer (1) and the nut (2) and tighten to 115 Nm (85 lb ft).
5. Install the wheel speed sensor wiring harness on the adjuster link. Refer to Rear Wheel Speed Sensor Replacement (See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel Speed Sensor Replacement).
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
7. Lower the vehicle.
8. Check and adjust the rear wheel alignment, if needed. Refer to Rear Camber Adjustment (See: Alignment/Service and Repair/Rear Camber
Adjustment).