Camaro V8-6.2L (2010)
Caution: Make sure the brake hose is not twisted or kinked after installation. Damage to the hose could result.
29. Install the brake caliper assembly (2) to the knuckle (3).
30. Install the NEW brake caliper anchor plate to knuckle retaining bolts (1) and tighten to 110 Nm (81 lb ft).
31. Install the rear park brake cable (4) into the rear knuckle (3).
Make sure that the rear park brake cables (4) are properly seated.
Note: Attach the rear park brake cable and clevis (1) to the park brake actuator (2) by pivoting the rear park brake cable and clevis (1) rearward
using pliers.
32. Attach the rear park brake cable and clevis (1) to the park brake actuator (2).
