Camaro V8-6.2L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the upper shock absorber bolts (1) and tighten the bolts to 58 Nm (43 lb ft).
3. If needed, use the hydraulic jack to raise the lower control arm and install the lower control arm bolt. Refer to Lower Control Arm Replacement (
See: Control Arm/Service and Repair/Rear Suspension/Lower Control Arm Replacement).
4. Install the lower shock absorber bolt (1) and nut (2) and tighten to 80 Nm (59 lb ft) plus an additional 120 degrees.
5. Remove the hydraulic jack.
6. Install the stabilizer shaft link from the lower control arm, if needed. Refer to Stabilizer Shaft Link Replacement (See: Stabilizer Bar/Stabilizer
Link/Service and Repair/Rear Suspension).
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
8. Lower the vehicle.
