Camaro V8-6.2L (2010)
1. Install the new stud from the back side of the hub.
2. Install flat washers on the wheel stud.
Note: Ensure that the wheel stud is fully seated against the wheel hub flange.
3. With the flat side of a wheel nut against the washers, tighten the wheel nut until the wheel stud head seats against the wheel hub flange.
4. Install the wheel bearing/hub assembly. Refer to Rear Wheel Bearing and Hub Replacement (See: Wheel Bearing/Service and Repair/Rear
Suspension).
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
6. Lower the vehicle.
