chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Two-Piece Propeller Shaft Replacement|Page 5584 > < Two-Piece Propeller Shaft Replacement|Page 5582
Page 5
background image

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

3. Install NEW the propeller shaft coupler nuts (1) and tighten to 91 Nm (67 lb ft).
4. Apply a small amount of clean lubricant on the pilot shaft on the transmission drive flange and the differential drive flange.

5. Align the reference marks (1) on the propeller shaft and the transmission drive flange.
6. Install the propeller shaft (1) to transmission drive flange.

Two-Piece Propeller Shaft Replacement|Page 5584 > < Two-Piece Propeller Shaft Replacement|Page 5582