Camaro V8-6.2L (2010)
5. Reach around the passenger side of the transmission until you feel the HVAC drain tube and grommet.
6. Remove the HVAC drain tube grommet. Let any/all of the water drain out completely.
Important:
Only apply a small amount of grease. Too much grease will cause another restriction in the drain tube.
7. Apply a small amount of grease (GM P/N 12345579 [in Canada, use P/N 10953481]) around the circumference of the HVAC drain tube and grommet
(1).
Important:
When installing the HVAC drain tube and grommet, make sure they are properly aligned to allow the HVAC water to drain properly.
8. Reinstall the same HVAC drain tube grommet. Make sure the drain tube is properly centered in the grommet.
9. Reinstall the transmission support and mount nuts.
10. Lower the vehicle. Let the vehicle run with A/C on.
11. Perform a final inspection for the A/C and verify that the system is draining properly.
Parts Information
Warranty Information
