Camaro RS V8-305 5.0L VIN E TBI (1990)
Engine Mount: Service and Repair
Fig. 1 Engine Mounting
Do not raise or support engine by positioning jack under oil pan, crankshaft damper or other sheet metal components. Raise engine only
enough to provide sufficient clearance for mount removal. Check for interference between rear of engine and cowl panel which could result in
distributor damage.
FRONT MOUNT
1.
Disconnect battery ground cable.
2.
Raise and support vehicle.
3.
Remove engine mount through bolt, then raise front of engine to release weight from mount.
4.
Remove mount to engine bolts and mount, Fig. 1.
5.
Reverse procedure to install.
REAR MOUNT