Camaro RS V8-305 5.0L VIN E TBI (1990)
Reassembly:
1. Place assembled brush holder in end frame with retaining wire protruding through the end frame.
2. Reverse the procedure, installing the regulator, diode trio, and stator.
3. Reassemble the two end frames with the attaching bolts.
4. With the alternator completely assembled, remove the brush retaining wire from the back of the alternator.
SI Series Alternator Repair
RECTIFIER END BEARING REPLACEMENT
Testing Of SI Series Alternators - Part 3 Of 3
For service, refer to image.
DRIVE END BEARING REPLACEMENT