Camaro Z28 V8-305 5.0L VIN F FI (1991)
NOTE:
The end of the cable near the number five bow latch must be correctly positioned to attach properly through the latch hole.
11.
Attach cable assembly to latch hole in number five bow latch and to cable support bracket.
12.
Secure slide to bezel housing with slide bolt and nut. Hand tighten bolt and nut.
13.
Check cable operation. Repeat above procedure as necessary.
14.
Lower tonneau and latch. Lower number five bow and latch.
LABOR OPERATION:
B3640
TIME ALLOWANCE:
0.4 HR.
Leak Issue
Application:
1987-1991
Condition:
Tonneau seal moves causing water leak.
Correction:
Replace tonneau seal with P/N 12511360.
1.
Release and raise number five bow to its vertical position.
2.
Release and raise tonneau to its vertical position.
3.
Remove old tonneau seal by peeling gently away from tonneau panel and removing clips, if applicable.
4.
Clean adhesive from tonneau panel using alcohol, oil-free naphtha or 3M General purpose Adhesive Cleaner # 08984 and follow manufacturer's
directions for use.
CAUTION:
Avoid contacting marnot decal on opposite side with adhesive cleaner.
