Camaro Z28 V8-305 5.0L VIN F FI (1991)
Throttle Position Sensor: Service and Repair
Port Fuel Injection
Throttle Position Sensor (TPS)
REMOVE OR DISCONNECT:
1.
TPS electrical connector.
2.
Two TPS attaching screws and retainers.
3.
TPS sensor.
INSTALL OR CONNECT:
1.
With the throttle valve in the normally closed idle position, install throttle position sensor on throttle body assembly, making sure TPS pickup
lever lines up with tang on throttle actuator lever.
2.
Two TPS screws and tighten to 2.0 N-m (18.0 in lbs).
